ISO 286 fit calculator
Hole and shaft limits, clearances and interference.
The engineering workbench
Look up hole and shaft limits, general tolerances and related shop standards. Calculations run in your browser. Nothing is uploaded.
Hole and shaft limits, clearances and interference.
Worked examples and a comparison with H7/h6.
Locational clearance fit for sliding and location.
Transition fit for accurate location.
Interference fit for press assembly.
Running clearance fit.
The common hole-basis class.
A wider hole used in clearance fits.
Close running fit with H7.
Upper limit at nominal size.
IT7 shaft with an h deviation.
Clearance or running fit with H8.
A symmetrical tolerance zone.
Transition fit with H7.
Interference or press fit with H7.
General tolerances for linear and angular dimensions, and geometry.
Chinese general tolerances and how they line up with ISO 2768.
General geometrical tolerances, classes H, K and L.
What changed in the 2026 edition and how to apply it.
Key size and keyway depths by shaft diameter (GB/T 1095 values; DIN 6885 / ISO/R 773 to be verified).
Keyway for a 20 mm shaft.
Keyway for a 25 mm shaft.
Keyway for a 30 mm shaft.
Keyway for a 40 mm shaft.
Keyway for a 50 mm shaft.
Choosing the core hole drill for ISO metric coarse threads.
Tap drill for M3.
Tap drill for M4.
Tap drill for M5.
Tap drill for M6.
Tap drill for M8.
Tap drill for M10.
Tap drill for M12.
Tap drill for M16.
Tap drill for M20.
Tap drill for M24.
Shaft groove dimensions (DIN 471 values to be verified).
Bore groove dimensions (DIN 472 values to be verified).